SCRIMMAGE MERGE!!!

Reviewed-on: #15
yayyyyyyyyyy

HEAVY_LIFTING_UPD

@@ -1,33 +0,0 @@
-from pybricks.hubs import PrimeHub
-from pybricks.pupdevices import Motor, ColorSensor, UltrasonicSensor, ForceSensor
-from pybricks.parameters import Button, Color, Direction, Port, Side, Stop
-from pybricks.robotics import DriveBase
-from pybricks.tools import wait, StopWatch
-from pybricks.tools import run_task, multitask
-
-hub = PrimeHub()
-
-left_motor = Motor(Port.A, Direction.COUNTERCLOCKWISE)
-right_motor = Motor(Port.B)
-
-left_arm = Motor(Port.C, Direction.COUNTERCLOCKWISE)
-right_arm = Motor(Port.D)
-drive_base = DriveBase(left_motor, right_motor, wheel_diameter=68.8, axle_track=180)
-drive_base.settings(600,500,300,200)
-drive_base.use_gyro(True)
-
-async def main():
-    await drive_base.straight(200)
-    await drive_base.turn(-20)
-    await drive_base.straight(536)
-    await drive_base.turn(60, Stop.HOLD)
-    await drive_base.straight(30)
-
-    await right_arm.run_angle(5000,3000)
-    await drive_base.straight(40)
-    await right_arm.run_angle(5000,-4000)
-    await drive_base.straight(-60)
-
-    await drive_base.turn(-60)
-    await drive_base.straight(-670)
-run_task(main())

RoshoDaGoat.py

@@ -1,42 +0,0 @@
-from pybricks.hubs import PrimeHub
-from pybricks.pupdevices import Motor, ColorSensor, UltrasonicSensor, ForceSensor
-from pybricks.parameters import Button, Color, Direction, Port, Side, Stop
-from pybricks.robotics import DriveBase
-from pybricks.tools import wait, StopWatch, run_task, multitask
-
-hub = PrimeHub()
-
-# Initialize both motors. In this example, the motor on the
-# left must turn counterclockwise to make the robot go forward.
-left_motor = Motor(Port.A, Direction.COUNTERCLOCKWISE)
-right_motor = Motor(Port.B)
-
-arm_motor = Motor(Port.D, Direction.CLOCKWISE)
-arm_motor_left= Motor(Port.C, Direction.CLOCKWISE)
-# Initialize the drive base. In this example, the wheel diameter is 56mm.
-# The distance between the two wheel-ground contact points is 112mm.
-drive_base = DriveBase(left_motor, right_motor, wheel_diameter=68.8, axle_track=180)
-
-print('The default settings are: ' + str(drive_base.settings()))
-drive_base.settings(300,1000,300,750)
-# Optionally, uncomment the line below to use the gyro for improved accuracy.
-drive_base.use_gyro(True)
-
-async def main():
-    await drive_base.straight(519)
-    await arm_motor_left.run_angle(-10000, 300)
-    await arm_motor_left.run_angle(10000, 600)
-    await drive_base.straight(160)
-    await drive_base.turn(-30)
-    await drive_base.straight(50)
-    await arm_motor.run_angle(3000, 3000)
-    await drive_base.straight(-150)
-    await drive_base.turn(135)
-    await drive_base.straight(50)
-    await arm_motor.run_angle(10000, -3000)
-    await drive_base.straight(-100)
-    await drive_base.turn(-54)
-    await arm_motor.run_angle(10000, -3000)
-    await drive_base.straight(200)
-    await arm_motor.run_angle(10000, 10000)
-run_task(main())

final/4main.py

@@ -86,19 +86,11 @@ async def Run2():
     await drive_base.straight(-600)
 async def Run3():
     await drive_base.straight(920)
-<<<<<<< HEAD:final/4main.py
     await drive_base.turn(-90)
     await drive_base.straight(60)
     drive_base.turn(-10)
     await left_arm.run_angle(10000,-4000)
     await drive_base.straight(-110)
-=======
-    await drive_base.turn(-90,Stop.HOLD)
-    await drive_base.straight(65)
-    drive_base.turn(-10)
-    await left_arm.run_angle(10000,-4000)
-    await drive_base.straight(-100)
->>>>>>> Vickram_dev_:final/main4.py
     await drive_base.turn(90)
     await drive_base.straight(2000)
 async def Run5():

final/main5.py

@@ -1,280 +0,0 @@
-from pybricks.hubs import PrimeHub
-from pybricks.pupdevices import Motor, ColorSensor
-from pybricks.parameters import Port, Stop, Color, Direction
-from pybricks.robotics import DriveBase
-from pybricks.tools import wait, StopWatch, multitask, run_task
-
-hub = PrimeHub()
-left_motor = Motor(Port.A, Direction.COUNTERCLOCKWISE)
-right_motor = Motor(Port.B)
-left_arm = Motor(Port.C)#, Direction.COUNTERCLOCKWISE)
-right_arm = Motor(Port.D)
-drive_base = DriveBase(left_motor, right_motor, wheel_diameter=68.8, axle_track=180)
-drive_base.settings(550,700,100,100)
-drive_base.use_gyro(True)
-color_sensor = ColorSensor(Port.F)
-Color.ORANGE = Color(37, 85, 95)
-Color.BLUE = Color(230,100,100)
-color_sensor.detectable_colors([Color.ORANGE, Color.BLUE, Color.GREEN, Color.WHITE, Color.RED, Color.YELLOW]) 
-hub.speaker.volume(50) # Set the volume of the speaker
-color_sensor.detectable_colors()
-# Celebration sound types
-class CelebrationSound:
-    VICTORY_FANFARE = 0
-    LEVEL_UP = 1
-    SUCCESS_CHIME = 2
-    TA_DA = 3
-    POWER_UP = 4
-    RICKROLL_INSPIRED = 5
-    
-async def play_victory_fanfare():
-    """Classic victory fanfare"""
-    notes = [
-        (262, 200),  # C4
-        (262, 200),  # C4
-        (262, 200),  # C4
-        (349, 600),  # F4
-    ]
-    
-    for freq, duration in notes:
-        await hub.speaker.beep(freq, duration)
-        await wait(50)
-async def play_level_up():
-    """Upward scale for level completion"""
-    notesold = [
-        (262, 100),  # C4
-        (294, 100),  # D4
-        (330, 100),  # E4
-        (349, 100),  # F4
-        (392, 100),  # G4
-        (440, 100),  # A4
-        (494, 100),  # B4
-        (523, 300),  # C5
-    ]
-    notes = [
-        (277, 100),
-        (330, 100),
-        (277, 100),
-        (554, 100),
-        (277, 100),
-        (413, 100),
-        (330, 100),
-        (277, 100),
-        (413, 100),
-        (277, 100),
-        (554, 100),
-        (413, 100),
-        (277, 100),
-        (413, 100),
-        (554, 100),
-        (413, 100)
-    ]
-    
-    for freq, duration in notes:
-        await hub.speaker.beep(freq, duration)
-        #await wait(20)
-async def play_success_chime():
-    """Simple success notification"""
-    notes = [
-        (523, 150),  # C5
-        (659, 150),  # E5
-        (784, 300),  # G5
-    ]
-    
-    for freq, duration in notes:
-        await hub.speaker.beep(freq, duration)
-        await wait(50)
-async def play_ta_da():
-    """Classic "ta-da!" sound"""
-    notes = [
-        (392, 200),  # G4
-        (523, 400),  # C5
-    ]
-    
-    for freq, duration in notes:
-        await hub.speaker.beep(freq, duration)
-        await wait(100)
-async def play_power_up():
-    """Rising power-up sound"""
-    for freq in range(200, 800, 50):
-        await hub.speaker.beep(freq, 50)
-        await wait(10)
-    await hub.speaker.beep(1000, 200)
-async def play_rickroll_inspired():
-    """Fun 80s-style dance beat inspired sound"""
-    # Upbeat bouncy rhythm
-    pattern = [
-        (392, 200), (440, 200), (494, 200), (523, 200),
-        (440, 200), (392, 200), (349, 200), (392, 300),
-        (440, 200), (392, 200), (349, 200), (330, 400),
-    ]
-    
-    for freq, duration in pattern:
-        await hub.speaker.beep(freq, duration)
-        await wait(50)
-async def celebrate_mission_complete(sound_type=CelebrationSound.SUCCESS_CHIME):
-    """
-    Main celebration function to call after completing a mission.
-    Plays a sound and shows light animation.
-    
-    Args:
-        sound_type: CelebrationSound enum value (default: SUCCESS_CHIME)
-    """
-    # Light show
-    hub.light.on(Color.GREEN)
-    
-    # Play the selected celebration sound
-    if sound_type == CelebrationSound.VICTORY_FANFARE:
-        await play_victory_fanfare()
-    elif sound_type == CelebrationSound.LEVEL_UP:
-        await play_level_up()
-    elif sound_type == CelebrationSound.SUCCESS_CHIME:
-        await play_success_chime()
-    elif sound_type == CelebrationSound.TA_DA:
-        await play_ta_da()
-    elif sound_type == CelebrationSound.POWER_UP:
-        await play_power_up()
-    elif sound_type == CelebrationSound.RICKROLL_INSPIRED:
-        await play_rickroll_inspired()
-    else:
-        await play_success_chime()  # Default fallback
-    
-    # Blink the light
-    for _ in range(3):
-        hub.light.off()
-        await wait(100)
-        hub.light.on(Color.GREEN)
-        await wait(100)
-    
-    hub.light.off()
-
-async def Run1():
-    await multitask(left_arm.run_angle(1000, 300), right_arm.run_angle(1000,500))
-    await drive_base.straight(320)
-
-    await right_arm.run_angle(5000,-500, Stop.HOLD)
-    await right_arm.run_angle(5000,500, Stop.HOLD)
-    await right_arm.run_angle(5000,-500, Stop.HOLD)
-    await right_arm.run_angle(5000,500, Stop.HOLD)
-    await right_arm.run_angle(5000,-500, Stop.HOLD)
-
-    await drive_base.turn(-20)
-    await drive_base.straight(275)
-    await drive_base.turn(20)
-    await drive_base.straight(63)
-
-    await multitask(drive_base.turn(-30), right_arm.run_angle(50,500))
-    await drive_base.turn(45)
-    await drive_base.straight(-135)
-    await drive_base.turn(-60)
-    await drive_base.straight(90)
-    await left_arm.run_angle(1000,-450)
-    await drive_base.straight(-145)
-    await left_arm.run_angle(1000,450)
-    await drive_base.straight(10)
-    await drive_base.turn(35)
-    await drive_base.straight(-500)
-
-async def Run2():
-    await drive_base.straight(200)
-    await drive_base.turn(-20)
-    await drive_base.straight(525)
-    await drive_base.turn(60)
-
-    await drive_base.straight(50)
-    await right_arm.run_angle(2000,1000)
-    await drive_base.straight(-50)
-    await drive_base.turn(45)
-    await drive_base.straight(50)
-    await right_arm.run_angle(350,-1000)
-
-    await drive_base.turn(-100)
-    await drive_base.straight(-600)
-
-
-async def Run3():
-    await drive_base.straight(915)
-    await drive_base.turn(-90)
-    await drive_base.straight(60)
-    await left_arm.run_angle(10000,-15000)
-    await drive_base.straight(-60)
-    await drive_base.turn(85)
-    await drive_base.straight(2000)
-
-async def Run4():
-    await drive_base.straight(519)
-    await arm_motor_left.run_angle(-10000, 300)
-    await arm_motor_left.run_angle(10000, 600)
-    await drive_base.straight(160)
-    await drive_base.turn(-30)
-    await drive_base.straight(50)
-    await arm_motor.run_angle(3000, 3000)
-    await drive_base.straight(-150)
-    await drive_base.turn(135)
-    await drive_base.straight(50)
-    await arm_motor.run_angle(10000, -3000)
-    await drive_base.straight(-100)
-    await drive_base.turn(-54)
-    await arm_motor.run_angle(10000, -3000)
-    await drive_base.straight(250)
-    await drive_base.turn(-5)
-    await arm_motor.run_angle(10000, 7000)
-    await drive_base.straight(-50)
-    await drive_base.turn(68)
-    await arm_motor.run_angle(10000, -6000)
-    await drive_base.straight(200)
-    await arm_motor.run_angle(10000, 4000)
-    await drive_base.turn(-40)
-    await arm_motor.run_angle(10000, 7000)
-
-async def Run5():
-    await drive_base.straight(420)
-    await right_arm.run_angle(300,-100)
-    await drive_base.straight(-100)
-    await right_arm.run_angle(300, 100)
-    await drive_base.straight(-350)
-
-
-async def Run6():
-    await drive_base.straight(420)
-    await right_arm.run_angle(300,-100)
-    await drive_base.straight(-100)
-    await right_arm.run_angle(300, 100)
-    await drive_base.straight(-350)
-async def main():
-    while True:
-    
-        await celebrate_mission_complete(CelebrationSound.LEVEL_UP)
-        color_reflected_percent = await color_sensor.reflection()
-        print(color_reflected_percent)
-
-        color_detected = await color_sensor.color()
-        print(f'Detected color: {color_detected.h}, {color_detected.s}, {color_detected.v}')
-        if color_reflected_percent > 0:
-            if color_detected == Color.GREEN:
-                print('Running Mission 1')
-                await Run1()
-                await celebrate_mission_complete(CelebrationSound.VICTORY_FANFARE)
-            elif color_detected == Color.WHITE:
-                print('Running Mission 2')
-                await Run2()
-                await celebrate_mission_complete(CelebrationSound.RICKROLL_INSPIRED)
-            elif color_detected == Color.YELLOW:
-                print('Running Mission 3')
-                await Run3()
-                await celebrate_mission_complete(CelebrationSound.SUCCESS_CHIME )
-            elif color_detected == Color.BLUE:
-                print('Running Mission 4')
-                await Run4()
-                await celebrate_mission_complete(CelebrationSound.POWER_UP)
-            elif color_detected == Color.RED:
-                print('Running Mission 5')
-                await Run5()
-                await celebrate_mission_complete(CelebrationSound.LEVEL_UP)
-            else:
-                hub.light.off()
-                left_motor.stop()
-                right_motor.stop()
-        await wait(1000) #prevent loop from iterating fast
-# Main execution loop
-run_task(main())

members/Rishi.txt

@@ -1,2 +0,0 @@
-Hi I'm Rishi, the coding manager for Team: 65266
-I love coding and making things that probably end the world.

missions/Boat_mission.py

@@ -1,27 +0,0 @@
-from pybricks.hubs import PrimeHub
-from pybricks.pupdevices import Motor, ColorSensor, UltrasonicSensor, ForceSensor
-from pybricks.parameters import Button, Color, Direction, Port, Side, Stop
-from pybricks.robotics import DriveBase
-from pybricks.tools import wait, StopWatch
-from pybricks.tools import run_task,multitask
-
-hub = PrimeHub()
-
-left_motor = Motor(Port.A, Direction.COUNTERCLOCKWISE)
-right_motor = Motor(Port.B)
-left_arm = Motor(Port.C, Direction.COUNTERCLOCKWISE)
-right_arm = Motor(Port.D)
-
-drive_base = DriveBase(left_motor, right_motor, wheel_diameter=68.8, axle_track=180)
-
-drive_base.settings(880,850,700,700)
-
-drive_base.use_gyro(True)
-
-first_run = True
-
-async def main():
-    await drive_base.straight(750)
-    await drive_base.straight(-650)
-    
-run_task(main())

missions/HEAVY_LIFTING_UPD.py

@@ -1,33 +0,0 @@
-from pybricks.hubs import PrimeHub
-from pybricks.pupdevices import Motor, ColorSensor, UltrasonicSensor, ForceSensor
-from pybricks.parameters import Button, Color, Direction, Port, Side, Stop
-from pybricks.robotics import DriveBase
-from pybricks.tools import wait, StopWatch
-from pybricks.tools import run_task, multitask
-
-hub = PrimeHub()
-
-left_motor = Motor(Port.A, Direction.COUNTERCLOCKWISE)
-right_motor = Motor(Port.B)
-
-left_arm = Motor(Port.C, Direction.COUNTERCLOCKWISE)
-right_arm = Motor(Port.D)
-drive_base = DriveBase(left_motor, right_motor, wheel_diameter=68.8, axle_track=180)
-drive_base.settings(600,500,300,200)
-drive_base.use_gyro(True)
-
-async def main():
-    await drive_base.straight(200)
-    await drive_base.turn(-20)
-    await drive_base.straight(536)
-    await drive_base.turn(60, Stop.HOLD)
-    await drive_base.straight(30)
-
-    await right_arm.run_angle(5000,3000)
-    await drive_base.straight(40)
-    await right_arm.run_angle(5000,-4000)
-    await drive_base.straight(-60)
-
-    await drive_base.turn(-60)
-    await drive_base.straight(-670)
-run_task(main())

missions/Heavy lifting.py

@@ -1,37 +0,0 @@
-from pybricks.hubs import PrimeHub
-from pybricks.pupdevices import Motor, ColorSensor, UltrasonicSensor, ForceSensor
-from pybricks.parameters import Button, Color, Direction, Port, Side, Stop
-from pybricks.robotics import DriveBase
-from pybricks.tools import wait, StopWatch
-from pybricks.tools import run_task, multitask
-
-hub = PrimeHub()
-
-left_motor = Motor(Port.A, Direction.COUNTERCLOCKWISE)
-right_motor = Motor(Port.B)
-
-left_arm = Motor(Port.C, Direction.COUNTERCLOCKWISE)
-right_arm = Motor(Port.D)
-drive_base = DriveBase(left_motor, right_motor, wheel_diameter=68.8, axle_track=180)
-drive_base.settings(600,500,300,200)
-drive_base.use_gyro(True)
-
-async def main():
-    await right_arm.run_angle(2000,1000)
-
-    await drive_base.straight(200)
-    await drive_base.turn(-20)
-    await drive_base.straight(525)
-    await drive_base.turn(60)
-    await drive_base.straight(30)
-
-    await right_arm.run_angle(2000,-1000)
-    await drive_base.straight(30)
-    await right_arm.run_angle(3000,1000)
-    await drive_base.straight(-60)
-
-    await drive_base.turn(-60)
-    await drive_base.straight(-525)
-    await drive_base.turn(20)
-    await drive_base.straight(-200)
-    

missions/Heavy_lifting_final.py

@@ -1,36 +0,0 @@
-from pybricks.hubs import PrimeHub
-from pybricks.pupdevices import Motor, ColorSensor, UltrasonicSensor, ForceSensor
-from pybricks.parameters import Button, Color, Direction, Port, Side, Stop
-from pybricks.robotics import DriveBase
-from pybricks.tools import wait, StopWatch
-from pybricks.tools import run_task, multitask
-
-hub = PrimeHub()
-
-left_motor = Motor(Port.A, Direction.COUNTERCLOCKWISE)
-right_motor = Motor(Port.B)
-
-left_arm = Motor(Port.C, Direction.COUNTERCLOCKWISE)
-right_arm = Motor(Port.D)
-drive_base = DriveBase(left_motor, right_motor, wheel_diameter=68.8, axle_track=180)
-drive_base.settings(600,500,300,200)
-drive_base.use_gyro(True)
-
-async def main():
-    #Get to mission
-    await drive_base.straight(200)
-    await drive_base.turn(-20)
-    await drive_base.straight(525)
-    await drive_base.turn(60)
-    #Solve mission
-    await drive_base.straight(50)
-    await right_arm.run_angle(2000,1000)
-    await drive_base.straight(-50)
-    await drive_base.turn(45)
-    await drive_base.straight(50)
-    await right_arm.run_angle(350,-1000)
-    #Return home
-    await drive_base.straight(-100)
-    await drive_base.turn(-100)
-    await drive_base.straight(-600)
-run_task(main())

missions/Lift2.py

@@ -1,34 +0,0 @@
-from pybricks.hubs import PrimeHub
-from pybricks.pupdevices import Motor, ColorSensor, UltrasonicSensor, ForceSensor
-from pybricks.parameters import Button, Color, Direction, Port, Side, Stop
-from pybricks.robotics import DriveBase
-from pybricks.tools import wait, StopWatch
-from pybricks.tools import run_task, multitask
-
-hub = PrimeHub()
-
-left_motor = Motor(Port.A, Direction.COUNTERCLOCKWISE)
-right_motor = Motor(Port.B)
-
-left_arm = Motor(Port.C, Direction.COUNTERCLOCKWISE)
-right_arm = Motor(Port.D)
-drive_base = DriveBase(left_motor, right_motor, wheel_diameter=68.8, axle_track=180)
-drive_base.settings(600,500,300,200)
-drive_base.use_gyro(True)
-
-async def main():
-    await drive_base.straight(200)
-    await drive_base.turn(-20)
-    await drive_base.straight(525)
-    await drive_base.turn(60)
-
-    await drive_base.straight(50)
-    await right_arm.run_angle(2000,1000)
-    await drive_base.straight(-50)
-    await drive_base.turn(45)
-    await drive_base.straight(50)
-    await right_arm.run_angle(350,-1000)
-
-    await drive_base.turn(-100)
-    await drive_base.straight(-600)
-run_task(main())

missions/Sand Mission.py

@@ -20,10 +20,10 @@ drive_base.use_gyro(True)
 
 
 async def main():
-    await drive_base.straight(500)
+    await drive_base.straight(420)
-    await right_arm.run_angle(300,100)
-    await drive_base.straight(-100)
     await right_arm.run_angle(300,-100)
+    await drive_base.straight(-100)
+    await right_arm.run_angle(300, 100)
     await drive_base.straight(-350)
     
 run_task(main())

missions/Sand_mission.py

@@ -1,29 +0,0 @@
-from pybricks.hubs import PrimeHub
-from pybricks.pupdevices import Motor, ColorSensor, UltrasonicSensor, ForceSensor
-from pybricks.parameters import Button, Color, Direction, Port, Side, Stop
-from pybricks.robotics import DriveBase
-from pybricks.tools import wait, StopWatch
-from pybricks.tools import run_task,multitask
-
-hub = PrimeHub()
-
-left_motor = Motor(Port.A, Direction.COUNTERCLOCKWISE)
-right_motor = Motor(Port.B)
-left_arm = Motor(Port.C, Direction.COUNTERCLOCKWISE)
-right_arm = Motor(Port.D)
-
-drive_base = DriveBase(left_motor, right_motor, wheel_diameter=68.8, axle_track=180)
-
-drive_base.settings(400,500,100,100)
-
-drive_base.use_gyro(True)
-
-
-async def main():
-    await drive_base.straight(500)
-    await right_arm.run_angle(300,100)
-    await drive_base.straight(-100)
-    await right_arm.run_angle(300,-100)
-    await drive_base.straight(-350)
-    
-run_task(main())

missions/Send_Over.py

@@ -23,9 +23,9 @@ async def main():
     await drive_base.straight(915)
     await drive_base.turn(-90)
     await drive_base.straight(60)
-    await left_arm.run_angle(10000,-4000)
+    await left_arm.run_angle(10000,-15000)
-    await drive_base.straight(-90)
+    await drive_base.straight(-60)
-    await drive_base.turn(80)
+    await drive_base.turn(85)
     await drive_base.straight(2000)
-
+    
 run_task(main())

missions/Send_Over_Final.py

@@ -1,46 +0,0 @@
-from pybricks.hubs import PrimeHub
-from pybricks.pupdevices import Motor, ColorSensor, UltrasonicSensor, ForceSensor
-from pybricks.parameters import Button, Color, Direction, Port, Side, Stop
-from pybricks.robotics import DriveBase
-from pybricks.tools import wait, StopWatch
-from pybricks.tools import run_task, multitask
-
-hub = PrimeHub()
-
-left_motor = Motor(Port.A, Direction.COUNTERCLOCKWISE)
-right_motor = Motor(Port.B)
-
-left_arm = Motor(Port.C, Direction.COUNTERCLOCKWISE)
-right_arm = Motor(Port.D)
-lazer_ranger = UltrasonicSensor(Port.E)
-
-drive_base = DriveBase(left_motor, right_motor, wheel_diameter=68.8, axle_track=180)
-
-drive_base.settings(600,500,300,200)
-drive_base.use_gyro(True)
-
-async def main():
-    #Get to mission
-    await drive_base.straight(920)
-    await drive_base.turn(-90,Stop.HOLD)
-    await drive_base.straight(65)
-    #Solve mission
-    drive_base.turn(-10)
-    await left_arm.run_angle(10000,-4000)
-    #Get to Red Start
-    await drive_base.straight(-110)
-    await drive_base.turn(90)
-    await drive_base.straight(500)
-    while True:
-        distance_mm = await lazer_ranger.distance()
-        print('distancing...',distance_mm)
-
-        if distance_mm < 300:
-            drive_base.stop
-            break
-        else:
-            drive_base.straight(300)
-            print('running...')
-        await wait(10)
-
-run_task(main())

missions/Set2.py

@@ -1,50 +0,0 @@
-from pybricks.hubs import PrimeHub
-from pybricks.pupdevices import Motor, ColorSensor, UltrasonicSensor, ForceSensor
-from pybricks.parameters import Button, Color, Direction, Port, Side, Stop
-from pybricks.robotics import DriveBase
-from pybricks.tools import wait, StopWatch, run_task, multitask
-
-hub = PrimeHub()
-
-# Initialize both motors. In this example, the motor on the
-# left must turn counterclockwise to make the robot go forward.
-left_motor = Motor(Port.A, Direction.COUNTERCLOCKWISE)
-right_motor = Motor(Port.B)
-
-arm_motor = Motor(Port.D, Direction.CLOCKWISE)
-arm_motor_left= Motor(Port.C, Direction.CLOCKWISE)
-# Initialize the drive base. In this example, the wheel diameter is 56mm.
-# The distance between the two wheel-ground contact points is 112mm.
-drive_base = DriveBase(left_motor, right_motor, wheel_diameter=68.8, axle_track=180)
-
-print('The default settings are: ' + str(drive_base.settings()))
-drive_base.settings(300,1000,300,750)
-# Optionally, uncomment the line below to use the gyro for improved accuracy.
-drive_base.use_gyro(True)
-
-async def main():
-    await drive_base.straight(519)
-    await arm_motor_left.run_angle(-10000, 300)
-    await arm_motor_left.run_angle(10000, 600)
-    await drive_base.straight(160)
-    await drive_base.turn(-30)
-    await drive_base.straight(50)
-    await arm_motor.run_angle(3000, 3000)
-    await drive_base.straight(-150)
-    await drive_base.turn(135)
-    await drive_base.straight(50)
-    await arm_motor.run_angle(10000, -3000)
-    await drive_base.straight(-100)
-    await drive_base.turn(-54)
-    await arm_motor.run_angle(10000, -3000)
-    await drive_base.straight(250)
-    await drive_base.turn(-5)
-    await arm_motor.run_angle(10000, 7000)
-    await drive_base.straight(-50)
-    await drive_base.turn(68)
-    await arm_motor.run_angle(10000, -6000)
-    await drive_base.straight(200)
-    await arm_motor.run_angle(10000, 4000)
-    await drive_base.turn(-40)
-    await arm_motor.run_angle(10000, 7000)
-run_task(main())

test_10_17_2025.py

@@ -1,303 +0,0 @@
-# Stuff from 10/15/2025
-# Atharv trying with no avail to add more colors to the color sensor logic 😭😭😭😭😭😭😭
-from pybricks.hubs import PrimeHub
-from pybricks.pupdevices import Motor, ColorSensor
-from pybricks.parameters import Port, Stop, Color, Direction
-from pybricks.robotics import DriveBase
-from pybricks.tools import wait, StopWatch, multitask, run_task
-
-hub = PrimeHub()
-left_motor = Motor(Port.A, Direction.COUNTERCLOCKWISE)
-right_motor = Motor(Port.B)
-left_arm = Motor(Port.C)#, Direction.COUNTERCLOCKWISE)
-right_arm = Motor(Port.D)
-drive_base = DriveBase(left_motor, right_motor, wheel_diameter=68.8, axle_track=180)
-drive_base.settings(550,700,100,100)
-drive_base.use_gyro(True)
-color_sensor = ColorSensor(Port.F)
-Color.ORANGE = Color(28, 61, 61)
-Color.BLUE = Color(230,100,100)
-Color.YELLOW = Color(37, 85, 95)
-Color.PURPLE = Color(326, 60, 87)
-color_sensor.detectable_colors([Color.ORANGE, Color.BLUE, Color.GREEN, Color.WHITE, Color.RED, Color.YELLOW, Color.NONE, Color.PURPLE]) 
-hub.speaker.volume(50) # Set the volume of the speaker
-color_sensor.detectable_colors()
-# Celebration sound types
-class CelebrationSound:
-    VICTORY_FANFARE = 0
-    LEVEL_UP = 1
-    SUCCESS_CHIME = 2
-    TA_DA = 3
-    POWER_UP = 4
-    RICKROLL_INSPIRED = 5
-    
-async def play_victory_fanfare():
-    """Classic victory fanfare"""
-    notes = [
-        (262, 200),  # C4
-        (262, 200),  # C4
-        (262, 200),  # C4
-        (349, 600),  # F4
-    ]
-    
-    for freq, duration in notes:
-        await hub.speaker.beep(freq, duration)
-        await wait(50)
-async def play_level_up():
-    """Upward scale for level completion"""
-    notesold = [
-        (262, 100),  # C4
-        (294, 100),  # D4
-        (330, 100),  # E4
-        (349, 100),  # F4
-        (392, 100),  # G4
-        (440, 100),  # A4
-        (494, 100),  # B4
-        (523, 300),  # C5
-    ]
-    notes = [
-        (277, 100),
-        (330, 100),
-        (277, 100),
-        (554, 100),
-        (277, 100),
-        (413, 100),
-        (330, 100),
-        (277, 100),
-        (413, 100),
-        (277, 100),
-        (554, 100),
-        (413, 100),
-        (277, 100),
-        (413, 100),
-        (554, 100),
-        (413, 100)
-    ]
-    
-    for freq, duration in notes:
-        await hub.speaker.beep(freq, duration)
-        #await wait(20)
-async def play_success_chime():
-    """Simple success notification"""
-    notes = [
-        (523, 150),  # C5
-        (659, 150),  # E5
-        (784, 300),  # G5
-    ]
-    
-    for freq, duration in notes:
-        await hub.speaker.beep(freq, duration)
-        await wait(50)
-async def play_ta_da():
-    """Classic "ta-da!" sound"""
-    notes = [
-        (392, 200),  # G4
-        (523, 400),  # C5
-    ]
-    
-    for freq, duration in notes:
-        await hub.speaker.beep(freq, duration)
-        await wait(100)
-async def play_power_up():
-    """Rising power-up sound"""
-    for freq in range(200, 800, 50):
-        await hub.speaker.beep(freq, 50)
-        await wait(10)
-    await hub.speaker.beep(1000, 200)
-async def play_rickroll_inspired():
-    """Fun 80s-style dance beat inspired sound"""
-    # Upbeat bouncy rhythm
-    pattern = [
-        (392, 200), (440, 200), (494, 200), (523, 200),
-        (440, 200), (392, 200), (349, 200), (392, 300),
-        (440, 200), (392, 200), (349, 200), (330, 400),
-    ]
-    
-    for freq, duration in pattern:
-        await hub.speaker.beep(freq, duration)
-        await wait(50)
-async def celebrate_mission_complete(sound_type=CelebrationSound.SUCCESS_CHIME):
-    """
-    Main celebration function to call after completing a mission.
-    Plays a sound and shows light animation.
-    
-    Args:
-        sound_type: CelebrationSound enum value (default: SUCCESS_CHIME)
-    """
-    # Light show
-    hub.light.on(Color.GREEN)
-    
-    # Play the selected celebration sound
-    if sound_type == CelebrationSound.VICTORY_FANFARE:
-        await play_victory_fanfare()
-    elif sound_type == CelebrationSound.LEVEL_UP:
-        await play_level_up()
-    elif sound_type == CelebrationSound.SUCCESS_CHIME:
-        await play_success_chime()
-    elif sound_type == CelebrationSound.TA_DA:
-        await play_ta_da()
-    elif sound_type == CelebrationSound.POWER_UP:
-        await play_power_up()
-    elif sound_type == CelebrationSound.RICKROLL_INSPIRED:
-        await play_rickroll_inspired()
-    else:
-        await play_success_chime()  # Default fallback
-    
-    # Blink the light
-    for _ in range(3):
-        hub.light.off()
-        await wait(100)
-        hub.light.on(Color.GREEN)
-        await wait(100)
-    
-    hub.light.off()
-
-async def Run1():
-    left_arm.run_angle(1000, -300)
-    right_arm.run_angle(1000,500)
-    await drive_base.straight(320)
-    await right_arm.run_angle(5000,-500, Stop.HOLD)
-    await right_arm.run_angle(5000,500, Stop.HOLD)
-    await right_arm.run_angle(5000,-500, Stop.HOLD)
-    await right_arm.run_angle(5000,500, Stop.HOLD)
-    await right_arm.run_angle(5000,-500, Stop.HOLD)
-    await drive_base.turn(-20)
-    await drive_base.straight(277)
-    await drive_base.turn(20)
-    await drive_base.straight(65)
-    await drive_base.turn(-30)
-    right_arm.run_angle(50,500)
-    await drive_base.turn(45)
-    await drive_base.straight(-145)
-    await drive_base.turn(-60)
-    await drive_base.straight(90)
-    await left_arm.run_angle(1000, 450)
-    await drive_base.straight(-145)
-    await left_arm.run_angle(1000,-450)
-    await drive_base.straight(10)
-    await drive_base.turn(35)
-    await drive_base.straight(-700)
-
-async def Run2():
-    await drive_base.straight(200)
-    await drive_base.turn(-20)
-    await drive_base.straight(525)
-    await drive_base.turn(60)
-
-    await drive_base.straight(50)
-    await right_arm.run_angle(2000,1000)
-    await drive_base.straight(-50)
-    await drive_base.turn(45)
-    await drive_base.straight(50)
-    await right_arm.run_angle(350,-1000)
-    await drive_base.straight(-100)
-    await drive_base.turn(-100)
-    await drive_base.straight(-750)
-
-
-async def Run3():
-    await drive_base.straight(920)
-    await drive_base.turn(-90)
-    await drive_base.straight(60)
-    drive_base.turn(-10)
-    await left_arm.run_angle(10000,-4000)
-    await drive_base.straight(-110)
-    await drive_base.turn(90)
-    await drive_base.straight(2000)
-
-async def Run4():
-    await drive_base.straight(519)
-    await drive_base.straight(519)
-    await arm_motor_left.run_angle(-10000, 300)
-    await arm_motor_left.run_angle(10000, 600)
-    await drive_base.straight(160)
-    await drive_base.turn(-30)
-    await drive_base.straight(50)
-    await arm_motor.run_angle(3000, 3000)
-    await drive_base.straight(-150)
-    await drive_base.turn(135)
-    await drive_base.straight(50)
-    await arm_motor.run_angle(10000, -3000)
-    await drive_base.straight(-100)
-    await drive_base.turn(-54)
-    await arm_motor.run_angle(10000, -3000)
-    await drive_base.straight(250)
-    await drive_base.turn(-5)
-    await arm_motor.run_angle(10000, 7000)
-    await drive_base.straight(-50)
-    await drive_base.turn(68)
-    await arm_motor.run_angle(10000, -6000)
-    await drive_base.straight(200)
-    await arm_motor.run_angle(10000, 4000)
-    await drive_base.turn(-40)
-    await arm_motor.run_angle(10000, 7000)
-
-async def Run5():
-    await drive_base.straight(420)
-    await right_arm.run_angle(300,-100)
-    await drive_base.straight(-100)
-    await right_arm.run_angle(300, 100)
-    await drive_base.straight(-350)
-
-
-async def Run6():
-    left_arm.run_angle(500,200)   
-    right_arm.run_angle(500,200)
-    await drive_base.straight(70)
-    
-    await drive_base.turn(-55)
-    await drive_base.straight(900)
-    await drive_base.turn(92.5)
-    
-    await drive_base.straight(75)
-    await drive_base.straight(21)
-    await right_arm.run_angle(500,-250)
-    await right_arm.run_angle(500,250)
-    await drive_base.turn(55)
-    
-    await left_arm.run_angle(300,-400)
-    
-    await drive_base.turn(46.5)
-    await drive_base.turn(-40)
-    await drive_base.straight(900)
-async def main():
-    while True:
-    
-        #await celebrate_mission_complete(CelebrationSound.LEVEL_UP)
-        color_reflected_percent = await color_sensor.reflection()
-        print(color_reflected_percent)
-        
-        color_detected = await color_sensor.color()
-        print(f'Detected color: {color_detected.h}, {color_detected.s}, {color_detected.v}')
-        if color_reflected_percent > 1:
-            if color_detected == Color.GREEN:
-                print('Running Mission 1')
-                await Run1()
-                #await celebrate_mission_complete(CelebrationSound.VICTORY_FANFARE)
-            elif color_detected == Color.WHITE:
-                print('Running Mission 2')
-                await Run2()
-                #await celebrate_mission_complete(CelebrationSound.RICKROLL_INSPIRED)
-            elif color_detected == Color.YELLOW:
-                print('Running Mission 3')
-                await Run3()
-                #await celebrate_mission_complete(CelebrationSound.SUCCESS_CHIME )
-            elif color_detected == Color.BLUE:
-                print('Running Mission 4')
-                await Run4()
-                #await celebrate_mission_complete(CelebrationSound.POWER_UP)
-            elif color_detected == Color.ORANGE:
-                print('Running Mission 5')
-                await Run5()
-                #await celebrate_mission_complete(CelebrationSound.LEVEL_UP)
-            elif color_detected == Color.PURPLE:
-                print('Running Mission 6 (this is ayaan\'s code)')
-                await Run6()
-                #await celebrate_mission_complete(CelebrationSound.LEVEL_UP)
-            else:
-                hub.light.off()
-                left_motor.stop()
-                right_motor.stop()
-        await wait(1000) #prevent loop from iterating fast
-# Main execution loop
-run_task(main())

twist_scrimmage.py

@@ -1,9 +1,11 @@
+# Imports... because we kinda need them...
 from pybricks.hubs import PrimeHub
 from pybricks.pupdevices import Motor, ColorSensor
 from pybricks.parameters import Port, Stop, Color, Direction
 from pybricks.robotics import DriveBase
 from pybricks.tools import wait, StopWatch, multitask, run_task
 
+# Sets all the default values for the runs
 hub = PrimeHub()
 left_motor = Motor(Port.A, Direction.COUNTERCLOCKWISE)
 right_motor = Motor(Port.B)
@@ -15,72 +17,198 @@ drive_base.use_gyro(True)
 color_sensor = ColorSensor(Port.F)
 Color.ORANGE = Color(37, 85, 95)
 Color.BLUE = Color(230,100,100)
-Color.YELLOW = Color(37, 85, 95)
+Color.YELLOW = Color(53, 75, 84)
-color_sensor.detectable_colors([Color.ORANGE, Color.BLUE, Color.GREEN, Color.WHITE, Color.RED, Color.YELLOW]) 
+color_sensor.detectable_colors([Color.YELLOW, Color.BLUE, Color.GREEN, Color.WHITE, Color.RED, Color.ORANGE, Color.NONE]) 
 hub.speaker.volume(50) # Set the volume of the speaker
 color_sensor.detectable_colors()
+
+# Notes to hertz for nice music
+cn = {
+    "Cs3": 138.59,
+    "D3": 146.83,
+    "Ds3": 155.56,
+    "E3": 164.81,
+    "F3": 174.61,
+    "Fs3": 185.00,
+    "G3": 196.00,
+    "Gs3": 207.65,
+    "A3": 220.00,
+    "As3": 233.08,
+    "B3": 246.94,
+    "C4": 261.63,
+    "Cs4": 277.18,
+    "D4": 293.66,
+    "Ds4": 311.13,
+    "E4": 329.63,
+    "F4": 349.23,
+    "Fs4": 369.99,
+    "G4": 392.00,
+    "Gs4": 415.30,
+    "A4": 440.00,
+    "As4": 466.16,
+    "B4": 493.88,
+    "C5": 523.25,
+    "Cs5": 554.37
+}
+
+
+# RUNS - contains the mission code that will be executed on color sensor detection
+async def Run1():
+    left_arm.run_angle(1000, 300)
+    right_arm.run_angle(1000,500)
+    await drive_base.straight(320)
+    await right_arm.run_angle(5000,-500, Stop.HOLD)
+    await right_arm.run_angle(5000,500, Stop.HOLD)
+    await right_arm.run_angle(5000,-500, Stop.HOLD)
+    await right_arm.run_angle(5000,500, Stop.HOLD)
+    await right_arm.run_angle(5000,-500, Stop.HOLD)
+    await drive_base.turn(-20)
+    await drive_base.straight(277)
+    await drive_base.turn(20)
+    await drive_base.straight(65)
+    await drive_base.turn(-30)
+    right_arm.run_angle(50,500)
+    await drive_base.turn(45)
+    await drive_base.straight(-145)
+    await drive_base.turn(-60)
+    await drive_base.straight(90)
+    await left_arm.run_angle(1000,-450)
+    await drive_base.straight(-145)
+    await left_arm.run_angle(1000,450)
+    await drive_base.straight(10)
+    await drive_base.turn(35)
+    await drive_base.straight(-600)
+
+async def Run2():
+    await drive_base.straight(200)
+    await drive_base.turn(-20)
+    await drive_base.straight(525)
+    await drive_base.turn(60)
+    await drive_base.straight(50)
+    await right_arm.run_angle(2000,1000)
+    await drive_base.straight(-50)
+    await drive_base.turn(45)
+    await drive_base.straight(50)
+    await right_arm.run_angle(350,-1000)
+    await drive_base.straight(-100)
+    await drive_base.turn(-100)
+    await drive_base.straight(-600)
+
+async def Run3():
+    await drive_base.straight(920)
+    await drive_base.turn(-90)
+    await drive_base.straight(60)
+    drive_base.turn(-10)
+    await left_arm.run_angle(10000,-4000)
+    await drive_base.straight(-110)
+    await drive_base.turn(90)
+    await drive_base.straight(2000)
+
+async def Run4():
+    await drive_base.straight(519)
+    await left_arm.run_angle(300, -100)
+    await left_arm.run_angle(300, 500)
+    await drive_base.straight(180)
+    await drive_base.turn(-37)
+    await drive_base.straight(50)
+    await right_arm.run_angle(300, -400)
+    await drive_base.straight(-150)
+    await drive_base.turn(125)
+    await drive_base.straight(50)
+    await right_arm.run_angle(300, 400)
+    await drive_base.straight(-75)
+    await right_arm.run_angle(300, 300)
+    await drive_base.turn(-40)
+    await drive_base.straight(250)
+    await right_arm.run_angle(100, -300)
+    await drive_base.straight(30)
+    await right_arm.run_angle(50,-250)
+    await drive_base.turn(30)
+    await drive_base.straight(-200)
+    await drive_base.turn(-50)
+    await drive_base.straight(-800)
+
+async def Run5():
+    await drive_base.straight(420)
+    await right_arm.run_angle(300,-100)
+    await drive_base.straight(-100)
+    await right_arm.run_angle(300, 100)
+    await drive_base.straight(-350)
+
+async def Run6():
+    left_arm.run_angle(500,200)   
+    right_arm.run_angle(500,200)
+    await drive_base.straight(70)
+    await drive_base.turn(-55)
+    await drive_base.straight(900)
+    await drive_base.turn(92.5)
+    await drive_base.straight(75)
+    await drive_base.straight(21)
+    await right_arm.run_angle(500,-250)
+    await right_arm.run_angle(500,250)
+    await drive_base.straight(-20)
+    await drive_base.turn(55)
+    await left_arm.run_angle(300,-400)
+    await drive_base.turn(70)
+    await left_arm.run_angle(300,400)
+    await drive_base.turn(-60)
+    await drive_base.straight(900)
+
 # Celebration sound types
 class CelebrationSound:
     VICTORY_FANFARE = 0
-    LEVEL_UP = 1
+    WAITING_SOUND = 1
     SUCCESS_CHIME = 2
     TA_DA = 3
     POWER_UP = 4
     RICKROLL_INSPIRED = 5
     
+# Sounds functions
 async def play_victory_fanfare():
     """Classic victory fanfare"""
     notes = [
-        (262, 200),  # C4
+    (cn["B3"], 200),
-        (262, 200),  # C4
+    (cn["B3"], 100),
-        (262, 200),  # C4
+    (cn["B3"], 100),
-        (349, 600),  # F4
+    (cn["E4"], 600)
     ]
     
     for freq, duration in notes:
         await hub.speaker.beep(freq, duration)
         await wait(50)
-async def play_level_up():
+async def play_waiting_sound():
-    """Upward scale for level completion"""
+
-    notesold = [
+    # T3rm1na1 V3l0c1ty arpeggio recreated in pybricks
-        (262, 100),  # C4
-        (294, 100),  # D4
-        (330, 100),  # E4
-        (349, 100),  # F4
-        (392, 100),  # G4
-        (440, 100),  # A4
-        (494, 100),  # B4
-        (523, 300),  # C5
-    ]
     notes = [
-        (277, 100),
+    (cn["Cs4"], 100),
-        (330, 100),
+    (cn["E4"], 100),
-        (277, 100),
+    (cn["Cs4"], 100),
-        (554, 100),
+    (cn["Cs5"], 100),
-        (277, 100),
+    (cn["Cs4"], 100),
-        (413, 100),
+    (cn["Gs4"], 100),
-        (330, 100),
+    (cn["E4"], 100),
-        (277, 100),
+    (cn["Cs4"], 100),
-        (413, 100),
+    (cn["Gs4"], 100),
-        (277, 100),
+    (cn["Cs4"], 100),
-        (554, 100),
+    (cn["Cs5"], 100),
-        (413, 100),
+    (cn["Gs4"], 100),
-        (277, 100),
+    (cn["Cs4"], 100),
-        (413, 100),
+    (cn["Gs4"], 100),
-        (554, 100),
+    (cn["Cs5"], 100),
-        (413, 100)
+    (cn["Gs4"], 100)
     ]
+
     
     for freq, duration in notes:
         await hub.speaker.beep(freq, duration)
-        #await wait(20)
 async def play_success_chime():
     """Simple success notification"""
     notes = [
-        (523, 150),  # C5
+    (cn["E4"], 150),
-        (659, 150),  # E5
+    (cn["Gs4"], 150),
-        (784, 300),  # G5
+    (cn["B4"], 300),
     ]
+
     
     for freq, duration in notes:
         await hub.speaker.beep(freq, duration)
@@ -88,32 +216,49 @@ async def play_success_chime():
 async def play_ta_da():
     """Classic "ta-da!" sound"""
     notes = [
-        (392, 200),  # G4
+    (cn["Cs4"], 200),
-        (523, 400),  # C5
+    (cn["Ds4"], 200),
+    (cn["E4"], 200),
+    (cn["Ds4"], 200),
+    (cn["E4"], 200),
+    (cn["Fs4"], 400),
+    (cn["Gs4"], 600),
+    (cn["Fs4"], 400),
+    (cn["Gs4"], 200),
+    (cn["A4"], 200),
+    (cn["B4"], 200),
+    (cn["C5"], 200),
+    (cn["Cs5"], 200)
     ]
     
     for freq, duration in notes:
         await hub.speaker.beep(freq, duration)
-        await wait(100)
+        #await wait(100)
 async def play_power_up():
     """Rising power-up sound"""
-    for freq in range(200, 800, 50):
+    frequencies = [
+    164.81, 207.65, 246.94, 329.63, 415.30, 493.88
+    ]
+
+    for freq in frequencies:
         await hub.speaker.beep(freq, 50)
         await wait(10)
-    await hub.speaker.beep(1000, 200)
+
+
+    await hub.speaker.beep(659.24, 200)
 async def play_rickroll_inspired():
     """Fun 80s-style dance beat inspired sound"""
     # Upbeat bouncy rhythm
-    pattern = [
+    pattern = [ (cn["B3"], 100), (cn["Cs4"], 100), (cn["Ds4"], 100), (cn["E4"], 100), (cn["Cs4"], 100), (cn["B3"], 100), (cn["A3"], 100), (cn["B3"], 200), (cn["Cs4"], 100), (cn["B3"], 100), (cn["A3"], 100), (cn["Gs3"], 200), ]
-        (392, 200), (440, 200), (494, 200), (523, 200),
+
-        (440, 200), (392, 200), (349, 200), (392, 300),
+
-        (440, 200), (392, 200), (349, 200), (330, 400),
-    ]
     
     for freq, duration in pattern:
         await hub.speaker.beep(freq, duration)
-        await wait(50)
+        #await wait(50)
-async def celebrate_mission_complete(sound_type=CelebrationSound.SUCCESS_CHIME):
+
+# Basically a big if else statement that calls the functions above        
+async def celebrate_mission_complete(sound_type=CelebrationSound.RICKROLL_INSPIRED):
     """
     Main celebration function to call after completing a mission.
     Plays a sound and shows light animation.
@@ -127,8 +272,8 @@ async def celebrate_mission_complete(sound_type=CelebrationSound.SUCCESS_CHIME):
     # Play the selected celebration sound
     if sound_type == CelebrationSound.VICTORY_FANFARE:
         await play_victory_fanfare()
-    elif sound_type == CelebrationSound.LEVEL_UP:
+    elif sound_type == CelebrationSound.WAITING_SOUND:
-        await play_level_up()
+        await play_waiting_sound()
     elif sound_type == CelebrationSound.SUCCESS_CHIME:
         await play_success_chime()
     elif sound_type == CelebrationSound.TA_DA:
@@ -149,133 +294,48 @@ async def celebrate_mission_complete(sound_type=CelebrationSound.SUCCESS_CHIME):
     
     hub.light.off()
 
-async def Run1():
+# This where everything happens    
-    left_arm.run_angle(1000, -300)
-    right_arm.run_angle(1000,500)
-    await drive_base.straight(320)
-    await right_arm.run_angle(5000,-500, Stop.HOLD)
-    await right_arm.run_angle(5000,500, Stop.HOLD)
-    await right_arm.run_angle(5000,-500, Stop.HOLD)
-    await right_arm.run_angle(5000,500, Stop.HOLD)
-    await right_arm.run_angle(5000,-500, Stop.HOLD)
-    await drive_base.turn(-20)
-    await drive_base.straight(277)
-    await drive_base.turn(20)
-    await drive_base.straight(65)
-    await drive_base.turn(-30)
-    right_arm.run_angle(50,500)
-    await drive_base.turn(45)
-    await drive_base.straight(-145)
-    await drive_base.turn(-60)
-    await drive_base.straight(90)
-    await left_arm.run_angle(1000, 450)
-    await drive_base.straight(-145)
-    await left_arm.run_angle(1000,-450)
-    await drive_base.straight(10)
-    await drive_base.turn(35)
-    await drive_base.straight(-700)
-
-async def Run2():
-    await drive_base.straight(200)
-    await drive_base.turn(-20)
-    await drive_base.straight(525)
-    await drive_base.turn(60)
-
-    await drive_base.straight(50)
-    await right_arm.run_angle(2000,1000)
-    await drive_base.straight(-50)
-    await drive_base.turn(45)
-    await drive_base.straight(50)
-    await right_arm.run_angle(350,-1000)
-    await drive_base.straight(-100)
-    await drive_base.turn(-100)
-    await drive_base.straight(-750)
-
-
-async def Run3():
-    await drive_base.straight(920)
-    await drive_base.turn(-90)
-    await drive_base.straight(60)
-    drive_base.turn(-10)
-    await left_arm.run_angle(10000,-4000)
-    await drive_base.straight(-110)
-    await drive_base.turn(90)
-    await drive_base.straight(2000)
-
-async def Run4():
-    await drive_base.straight(519)
-    await left_arm.run_angle(300, -200)
-    await left_arm.run_angle(800, 1000)
-    await drive_base.straight(180)
-    await drive_base.turn(-37)
-    await right_arm.run_angle(300, -50)
-    await drive_base.straight(50)
-    await right_arm.run_angle(300, -350)
-    await drive_base.straight(-150)
-    await drive_base.turn(125)
-    await drive_base.straight(50)
-    await right_arm.run_angle(300, 400)
-    await drive_base.straight(-75)
-    await right_arm.run_angle(300, -200)
-    await drive_base.turn(-40)
-    await right_arm.run_angle(300, 250)
-    await drive_base.straight(260)
-    await right_arm.run_angle(100, -300)
-    await drive_base.straight(30)
-    await right_arm.run_angle(50,-250)
-    await drive_base.turn(30)
-    await drive_base.straight(-200)
-    await drive_base.turn(-67)
-    await drive_base.straight(-800)
-
-async def Run5():
-    await drive_base.straight(420)
-    await right_arm.run_angle(300,-100)
-    await drive_base.straight(-100)
-    await right_arm.run_angle(300, 100)
-    await drive_base.straight(-350)
-
-
-async def Run6():
-    await drive_base.straight(420)
-    await right_arm.run_angle(300,-100)
-    await drive_base.straight(-100)
-    await right_arm.run_angle(300, 100)
-    await drive_base.straight(-350)
 async def main():
+    # MAIN LOOP    
     while True:
-    
+        await celebrate_mission_complete(CelebrationSound.RICKROLL_INSPIRED)
-        #await celebrate_mission_complete(CelebrationSound.LEVEL_UP)
         color_reflected_percent = await color_sensor.reflection()
-        print(color_reflected_percent)
+        print(f"Color reflection percentage: {color_reflected_percent}")
 
         color_detected = await color_sensor.color()
-        print(f'Detected color: {color_detected.h}, {color_detected.s}, {color_detected.v}')
+        print(f'Detected color: {color_detected}')
-        if color_reflected_percent > 1:
+        hsv = await color_sensor.hsv()
+        print(f"Measured HSV: {hsv}")
+        if color_reflected_percent > 0:
             if color_detected == Color.GREEN:
                 print('Running Mission 1')
                 await Run1()
-                #await celebrate_mission_complete(CelebrationSound.VICTORY_FANFARE)
+                await celebrate_mission_complete(CelebrationSound.VICTORY_FANFARE)
             elif color_detected == Color.WHITE:
                 print('Running Mission 2')
                 await Run2()
-                #await celebrate_mission_complete(CelebrationSound.RICKROLL_INSPIRED)
+                await celebrate_mission_complete(CelebrationSound.RICKROLL_INSPIRED)
             elif color_detected == Color.YELLOW:
                 print('Running Mission 3')
                 await Run3()
-                #await celebrate_mission_complete(CelebrationSound.SUCCESS_CHIME )
+                await celebrate_mission_complete(CelebrationSound.SUCCESS_CHIME)
-            elif color_detected == Color.BLUE:
+            elif color_detected == Color.ORANGE:
                 print('Running Mission 4')
                 await Run4()
-                #await celebrate_mission_complete(CelebrationSound.POWER_UP)
+                await celebrate_mission_complete(CelebrationSound.POWER_UP)
-            elif color_detected == Color.RED:
+            elif color_detected == Color.BLUE:
                 print('Running Mission 5')
                 await Run5()
-                #await celebrate_mission_complete(CelebrationSound.LEVEL_UP)
+                await celebrate_mission_complete(CelebrationSound.POWER_UP)
+            elif color_detected == Color.RED:
+                print('Running Mission 6')
+                await Run6()
+                await celebrate_mission_complete(CelebrationSound.TA_DA)
             else:
                 hub.light.off()
                 left_motor.stop()
                 right_motor.stop()
-        await wait(1000) #prevent loop from iterating fast
+        else:
-# Main execution loop
+            print("No color was detected.")
-run_task(main())
+        await wait(100) # prevent loop from iterating fast
+run_task(main())