Merge pull request 'Update missions/Boat.py' (#37) from Rishi_dev into dev

Reviewed-on: #37

missions/Boat.py

@@ -2,26 +2,36 @@ from pybricks.hubs import PrimeHub
 from pybricks.pupdevices import Motor, ColorSensor, UltrasonicSensor, ForceSensor
 from pybricks.parameters import Button, Color, Direction, Port, Side, Stop
 from pybricks.robotics import DriveBase
-from pybricks.tools import wait, StopWatch
+from pybricks.tools import wait, StopWatch, run_task, multitask
-from pybricks.tools import run_task,multitask
 
 hub = PrimeHub()
 
+# Initialize both motors. In this example, the motor on the
+# left must turn counterclockwise to make the robot go forward.
 left_motor = Motor(Port.A, Direction.COUNTERCLOCKWISE)
 right_motor = Motor(Port.B)
-left_arm = Motor(Port.C, Direction.COUNTERCLOCKWISE)
-right_arm = Motor(Port.D)
 
+arm_motor = Motor(Port.D, Direction.CLOCKWISE)
+arm_motor_left= Motor(Port.C, Direction.CLOCKWISE)
+# Initialize the drive base. In this example, the wheel diameter is 56mm.
+# The distance between the two wheel-ground contact points is 112mm.
 drive_base = DriveBase(left_motor, right_motor, wheel_diameter=68.8, axle_track=180)
 
-drive_base.settings(550,700,100,100)
+print('The default settings are: ' + str(drive_base.settings()))
-
+drive_base.settings(300,1000,300,750)
+# Optionally, uncomment the line below to use the gyro for improved accuracy.
 drive_base.use_gyro(True)
 
-first_run = False
-
 async def main():
-    await drive_base.straight(750)
+    await drive_base.straight(700)
-    await drive_base.straight(-650)
+    await drive_base.turn(-17)
-    
+    await drive_base.straight(100)
+    await drive_base.straight(-205)
+    await drive_base.turn(62)
+    await drive_base.straight(125)
+    await arm_motor.run_angle(1000, -1200)
+    await drive_base.straight(87)
+    await arm_motor.run_angle(300, 1200)
+    await drive_base.straight(-875)
+
 run_task(main())