Update missions/M8_5.py

Mission Run #5

README.md

@@ -22,7 +22,4 @@ Load the master file into PyBricks, then send it over to the robot. Then you hol
 
 ## License
 GNU General Public License
-
 You can take inspiration from our code, but you can't take our exact code.
-
-Read LICENSE for more information.

final/1main.py

@@ -1,116 +0,0 @@
-
-from pybricks.hubs import PrimeHub
-from pybricks.pupdevices import Motor, ColorSensor
-from pybricks.parameters import Port, Stop, Color, Direction
-from pybricks.robotics import DriveBase
-from pybricks.tools import wait, StopWatch, multitask, run_task
-import asyncio
-
-hub = PrimeHub()
-left_motor = Motor(Port.A, Direction.COUNTERCLOCKWISE)
-right_motor = Motor(Port.B)
-atarm1 = Motor(Port.E, Direction.COUNTERCLOCKWISE)
-atarm2 = Motor(Port.F)
-drive_base = DriveBase(left_motor, right_motor, wheel_diameter=56, axle_track=112)
-color_sensor = ColorSensor(Port.C)
-
-drive_base.settings(300, 500, 300, 200)
-Color.ORANGE = Color(10, 100, 100)
-Color.MAGENTA = Color(321, 100, 86)
-
-
-async def Run1():
-    left_arm.run_angle(1000, 300)
-    right_arm.run_angle(1000,500)
-    await drive_base.straight(320)
-
-    await right_arm.run_angle(5000,-500, Stop.HOLD)
-    await right_arm.run_angle(5000,500, Stop.HOLD)
-    await right_arm.run_angle(5000,-500, Stop.HOLD)
-    await right_arm.run_angle(5000,500, Stop.HOLD)
-    await right_arm.run_angle(5000,-500, Stop.HOLD)
-
-    await drive_base.turn(-20)
-    await drive_base.straight(275)
-    await drive_base.turn(20)
-    await drive_base.straight(63)
-
-    await drive_base.turn(-30)
-    right_arm.run_angle(50,500)
-    await drive_base.turn(45)
-    await drive_base.straight(-135)
-    await drive_base.turn(-60)
-    await drive_base.straight(90)
-    await left_arm.run_angle(1000,-450)
-    await drive_base.straight(-145)
-    await left_arm.run_angle(1000,450)
-    await drive_base.straight(10)
-    await drive_base.turn(35)
-    await drive_base.straight(-500)
-
-async def Run2():
-    await drive_base.straight(200)
-    await drive_base.turn(-20)
-    await drive_base.straight(525)
-    await drive_base.turn(60)
-
-    await drive_base.straight(50)
-    await right_arm.run_angle(2000,1000)
-    await drive_base.straight(-50)
-    await drive_base.turn(45)
-    await drive_base.straight(50)
-    await right_arm.run_angle(350,-1000)
-
-    await drive_base.turn(-100)
-    await drive_base.straight(-600)
-
-
-async def Run3():
-    await drive_base.straight(915)
-    await drive_base.turn(-90)
-    await drive_base.straight(60)
-    await left_arm.run_angle(10000,-15000)
-    await drive_base.straight(-60)
-    await drive_base.turn(85)
-    await drive_base.straight(2000)
-
-
-async def Run5():
-    await drive_base.straight(420)
-    await right_arm.run_angle(300,-100)
-    await drive_base.straight(-100)
-    await right_arm.run_angle(300, 100)
-    await drive_base.straight(-350)
-
-
-async def Run6():
-    await drive_base.straight(420)
-    await right_arm.run_angle(300,-100)
-    await drive_base.straight(-100)
-    await right_arm.run_angle(300, 100)
-    await drive_base.straight(-350)
-
-
-async def main():
-    if color_sensor.color() == Color.ORANGE:
-        await Run1()
-        
-    if color_sensor.color() == Color.GREEN:
-        await Run2()
-        
-    if color_sensor.color() == Color.WHITE:
-        await Run3()
-        
-    if color_sensor.color() == Color.YELLOW:
-        await Run5()
-        
-    if color_sensor.color() == Color.BLUE:
-        await Run6()
-        
-    
-    print(f'Detected color: {color_sensor.color()}')
-
-# Main execution loop
-while True:
-    run_task(main())
-    wait(100)

missions/Lift.py

@@ -1,34 +0,0 @@
-from pybricks.hubs import PrimeHub
-from pybricks.pupdevices import Motor, ColorSensor, UltrasonicSensor, ForceSensor
-from pybricks.parameters import Button, Color, Direction, Port, Side, Stop
-from pybricks.robotics import DriveBase
-from pybricks.tools import wait, StopWatch
-from pybricks.tools import run_task, multitask
-
-hub = PrimeHub()
-
-left_motor = Motor(Port.A, Direction.COUNTERCLOCKWISE)
-right_motor = Motor(Port.B)
-
-left_arm = Motor(Port.C, Direction.COUNTERCLOCKWISE)
-right_arm = Motor(Port.D)
-drive_base = DriveBase(left_motor, right_motor, wheel_diameter=68.8, axle_track=180)
-drive_base.settings(600,500,300,200)
-drive_base.use_gyro(True)
-
-async def main():
-    await drive_base.straight(200)
-    await drive_base.turn(-20)
-    await drive_base.straight(525)
-    await drive_base.turn(60)
-
-    await drive_base.straight(50)
-    await right_arm.run_angle(2000,1000)
-    await drive_base.straight(-50)
-    await drive_base.turn(45)
-    await drive_base.straight(50)
-    await right_arm.run_angle(350,-1000)
-
-    await drive_base.turn(-100)
-    await drive_base.straight(-600)
-run_task(main())

missions/mission_09_old.py

@@ -1,5 +1,4 @@
 # ---JOHANNES---
-# THIS CODE IS NOT USED ANYMORE AND SHOULD NOT BE USED!!!!!!
 from pybricks.hubs import PrimeHub
 from pybricks.pupdevices import Motor, ColorSensor, UltrasonicSensor, ForceSensor
 from pybricks.parameters import Button, Color, Direction, Port, Side, Stop

missions/tip the scale.py

@@ -1,42 +0,0 @@
-from pybricks.hubs import PrimeHub
-from pybricks.pupdevices import Motor, ColorSensor, UltrasonicSensor, ForceSensor
-from pybricks.parameters import Button, Color, Direction, Port, Side, Stop
-from pybricks.robotics import DriveBase
-from pybricks.tools import wait, StopWatch
-from pybricks.tools import run_task, multitask
-
-hub = PrimeHub()
-
-left_motor = Motor(Port.A, Direction.COUNTERCLOCKWISE)
-right_motor = Motor(Port.B)
-
-
-left_arm = Motor(Port.C, Direction.COUNTERCLOCKWISE)
-right_arm = Motor(Port.D)
-
-drive_base = DriveBase(left_motor, right_motor, wheel_diameter=68.8, axle_track=180)
-drive_base.settings(300,1000,300,200)
-
-#drive_base.use_gyro(True)
-
-async def main():
-    left_arm.run_angle(500,200)   
-    right_arm.run_angle(500,200)
-    await drive_base.straight(70)
-    
-    await drive_base.turn(-55)
-    await drive_base.straight(900)
-    await drive_base.turn(92.5)
-    
-    await drive_base.straight(75)
-    await drive_base.straight(21)
-    await right_arm.run_angle(500,-250)
-    await right_arm.run_angle(500,250)
-    await drive_base.turn(55)
-    
-    await left_arm.run_angle(300,-400)
-    
-    await drive_base.turn(46.5)
-    await drive_base.turn(-40)
-    await drive_base.straight(900)
-run_task(main())

utils/combine_runs.py

@@ -1,5 +1,5 @@
 # Guys please use the same setup code and put into the imports for consistency
-script_names = ["Run1.py", "Run2.py", "Run3.py", "Run5.py", "Run6.py"]  # This is a list of the files of the mission runs
+script_names = ["untitled14.py", "untitled13.py"]  # This is a list of the files of the mission runs
 content = ""
 imports = """
 from pybricks.hubs import PrimeHub
@@ -72,7 +72,7 @@ function_calls = []
 
 # Define colors properly - one per script
 colors = [
-    'Color.ORANGE', 'Color.GREEN', 'Color.WHITE', 
+    'Color.ORANGE', 'Color.GREEN', 'Color.BLACK', 'Color.WHITE', 
     'Color.YELLOW', 'Color.BLUE', 'Color.MAGENTA', 'Color.RED', 'Color.BROWN'
 ]
 
@@ -96,7 +96,7 @@ for i, f_name in enumerate(script_names):
                     m.write(func_def)
                 
                 # Assign one color per script
-                color_condition = colors[i]
+                color_condition = colors[i % len(colors)]
                 function_calls.append({
                     'name': func_name,
                     'is_async': is_async,
@@ -120,10 +120,10 @@ with open("main.py", 'a') as m:
             m.write(f"        await {func_info['name']}()\n")
         else:
             m.write(f"        {func_info['name']}()\n")
-        m.write("        \n")
+        m.write("        return  # Exit after running one function\n")
     
     # Add a default case
-    m.write("    \n")
+    m.write("    # Default case - no matching color detected\n")
     m.write("    print(f'Detected color: {color_sensor.color()}')\n")
 
 # Write the main loop
@@ -132,3 +132,8 @@ with open("main.py", 'a') as m:
     m.write("while True:\n")
     m.write("    run_task(main())\n")
     m.write("    wait(100)\n")
+
+print("Script merger completed successfully!")
+print("Functions created:")
+for func_info in function_calls:
+    print(f"  - {func_info['name']}() triggered by {func_info['color']} (from {func_info['filename']})")