Merge pull request 'Rishi_dev' (#36) from Rishi_dev into dev

Reviewed-on: #36

missions/Hypo.py

@@ -0,0 +1,37 @@
+from pybricks.hubs import PrimeHub
+from pybricks.pupdevices import Motor, ColorSensor, UltrasonicSensor, ForceSensor
+from pybricks.parameters import Button, Color, Direction, Port, Side, Stop
+from pybricks.robotics import DriveBase
+from pybricks.tools import wait, StopWatch, run_task, multitask
+
+hub = PrimeHub()
+
+# Initialize both motors. In this example, the motor on the
+# left must turn counterclockwise to make the robot go forward.
+left_motor = Motor(Port.A, Direction.COUNTERCLOCKWISE)
+right_motor = Motor(Port.B)
+
+arm_motor = Motor(Port.D, Direction.CLOCKWISE)
+arm_motor_left= Motor(Port.C, Direction.CLOCKWISE)
+# Initialize the drive base. In this example, the wheel diameter is 56mm.
+# The distance between the two wheel-ground contact points is 112mm.
+drive_base = DriveBase(left_motor, right_motor, wheel_diameter=68.8, axle_track=180)
+
+print('The default settings are: ' + str(drive_base.settings()))
+drive_base.settings(300,1000,300,750)
+# Optionally, uncomment the line below to use the gyro for improved accuracy.
+drive_base.use_gyro(True)
+
+async def main():
+    await drive_base.straight(700)
+    await drive_base.turn(-17)
+    await drive_base.straight(100)
+    await drive_base.straight(-205)
+    await drive_base.turn(62)
+    await drive_base.straight(125)
+    await arm_motor.run_angle(1000, -1200)
+    await drive_base.straight(87)
+    await arm_motor.run_angle(300, 1200)
+    await drive_base.straight(-875)
+
+run_task(main())

missions/Rishi.py

@@ -37,14 +37,6 @@ async def main():
     await drive_base.straight(-100)
     await drive_base.turn(-54)
     await arm_motor.run_angle(10000, -3000)
-    await drive_base.straight(250)
-    await drive_base.turn(-5)
-    await arm_motor.run_angle(10000, 7000)
-    await drive_base.straight(-50)
-    await drive_base.turn(68)
-    await arm_motor.run_angle(10000, -6000)
     await drive_base.straight(200)
-    await arm_motor.run_angle(10000, 4000)
-    await drive_base.turn(-40)
-    await arm_motor.run_angle(10000, 7000)
+    await arm_motor.run_angle(10000, 10000)
 run_task(main())