Initial commit

Mission Run #5

missions/Bautism.py

@@ -0,0 +1,45 @@
+from pybricks.hubs import PrimeHub
+from pybricks.pupdevices import Motor, ColorSensor, UltrasonicSensor, ForceSensor
+from pybricks.parameters import Button, Color, Direction, Port, Side, Stop
+from pybricks.robotics import DriveBase
+from pybricks.tools import wait, StopWatch, run_task
+
+hub = PrimeHub()
+
+# Initialize both motors. In this example, the motor on the
+# left must turn counterclockwise to make the robot go forward.
+left_motor = Motor(Port.A, Direction.COUNTERCLOCKWISE)
+right_motor = Motor(Port.B)
+
+arm_motor = Motor(Port.D, Direction.CLOCKWISE)
+arm_motor_left= Motor(Port.C, Direction.CLOCKWISE)
+# Initialize the drive base. In this example, the wheel diameter is 56mm.
+# The distance between the two wheel-ground contact points is 112mm.
+drive_base = DriveBase(left_motor, right_motor, wheel_diameter=68.8, axle_track=180)
+
+print('The default settings are: ' + str(drive_base.settings()))
+drive_base.settings(300,1000,300,750)
+# Optionally, uncomment the line below to use the gyro for improved accuracy.
+drive_base.use_gyro(True)
+
+async def main():
+    await drive_base.straight(519)
+    await arm_motor_left.run_angle(300, -100)
+    await arm_motor_left.run_angle(300, 500)
+    await drive_base.straight(180)
+    await drive_base.turn(-37)
+    await drive_base.straight(50)
+    await arm_motor.run_angle(300, -400)
+    await drive_base.straight(-150)
+    await drive_base.turn(135)
+    await drive_base.straight(50)
+    await arm_motor.run_angle(300, 400)
+    await drive_base.straight(-75)
+    await arm_motor.run_angle(300, 300)
+    await drive_base.turn(-50)
+    await drive_base.straight(162)
+    await arm_motor.run_angle(100, -200)
+    await drive_base.straight(30)
+    await arm_motor.run_angle(50,-500)
+
+run_task(main())