diff --git a/missions/Set2.py b/missions/Set2.py
deleted file mode 100644
index 9298da3..0000000
--- a/missions/Set2.py
+++ /dev/null
@@ -1,50 +0,0 @@
-from pybricks.hubs import PrimeHub
-from pybricks.pupdevices import Motor, ColorSensor, UltrasonicSensor, ForceSensor
-from pybricks.parameters import Button, Color, Direction, Port, Side, Stop
-from pybricks.robotics import DriveBase
-from pybricks.tools import wait, StopWatch, run_task, multitask
-
-hub = PrimeHub()
-
-# Initialize both motors. In this example, the motor on the
-# left must turn counterclockwise to make the robot go forward.
-left_motor = Motor(Port.A, Direction.COUNTERCLOCKWISE)
-right_motor = Motor(Port.B)
-
-arm_motor = Motor(Port.D, Direction.CLOCKWISE)
-arm_motor_left= Motor(Port.C, Direction.CLOCKWISE)
-# Initialize the drive base. In this example, the wheel diameter is 56mm.
-# The distance between the two wheel-ground contact points is 112mm.
-drive_base = DriveBase(left_motor, right_motor, wheel_diameter=68.8, axle_track=180)
-
-print('The default settings are: ' + str(drive_base.settings()))
-drive_base.settings(300,1000,300,750)
-# Optionally, uncomment the line below to use the gyro for improved accuracy.
-drive_base.use_gyro(True)
-
-async def main():
-    await drive_base.straight(519)
-    await arm_motor_left.run_angle(-10000, 300)
-    await arm_motor_left.run_angle(10000, 600)
-    await drive_base.straight(160)
-    await drive_base.turn(-30)
-    await drive_base.straight(50)
-    await arm_motor.run_angle(3000, 3000)
-    await drive_base.straight(-150)
-    await drive_base.turn(135)
-    await drive_base.straight(50)
-    await arm_motor.run_angle(10000, -3000)
-    await drive_base.straight(-100)
-    await drive_base.turn(-54)
-    await arm_motor.run_angle(10000, -3000)
-    await drive_base.straight(250)
-    await drive_base.turn(-5)
-    await arm_motor.run_angle(10000, 7000)
-    await drive_base.straight(-50)
-    await drive_base.turn(68)
-    await arm_motor.run_angle(10000, -6000)
-    await drive_base.straight(200)
-    await arm_motor.run_angle(10000, 4000)
-    await drive_base.turn(-40)
-    await arm_motor.run_angle(10000, 7000)
-run_task(main())
\ No newline at end of file