Update LINEUPS.md

This commit is contained in:
2025-11-09 01:12:56 +00:00
parent 9cdb70dd80
commit 3b22d28e98

View File

@@ -8,6 +8,6 @@
- Mission Run #3 (Send Over) [Right/Blue Home] - The robot should be lined up on the vertical edge of the right home. The robot's right edge should be positioned on the 1st thin line from the top. Note that the 0th line is the one that is in the inner curve. - Mission Run #3 (Send Over) [Right/Blue Home] - The robot should be lined up on the vertical edge of the right home. The robot's right edge should be positioned on the 1st thin line from the top. Note that the 0th line is the one that is in the inner curve.
- Mission Run #4 (Run #4) [Left/Red Home] - The robot's left edge should be positioned on the 2nd thin line from the left. - Mission Run #4 (Run #4) [Left/Red Home] - The robot's left edge should be positioned on the 2nd thick line from the left.
- Mission Run #5 (Boat mission) [Left/Red Home] - There are two alignments for this. When sending off the robot for part 1, the robot should be facing the right home. It's right edge should be positioned at the very bottom edge of the board. Once it completes the pulling part, once it comes back begin part 2. For part 2, the middle of the robot's right side should be positioned in the middle of the 3rd thick and the 3rd thick, 1st thin lines. - Mission Run #5 (Boat mission) [Left/Red Home] - There are two alignments for this. When sending off the robot for part 1, the robot should be facing the right home. It's right edge should be positioned at the very bottom edge of the board. Once it completes the pulling part, once it comes back begin part 2. For part 2, the middle of the robot's right side should be positioned in the middle of the 3rd thick and the 3rd thick, 1st thin lines.