From 14bc8d291a1db58569f55faac5b32f9c248f5e75 Mon Sep 17 00:00:00 2001
From: Rishikesh Lolapu <31lolapr@elmbrookstudents.org>
Date: Thu, 6 Nov 2025 00:58:52 +0000
Subject: [PATCH] Add missions/Hypo.py

---
 missions/Hypo.py | 37 +++++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)
 create mode 100644 missions/Hypo.py

diff --git a/missions/Hypo.py b/missions/Hypo.py
new file mode 100644
index 0000000..47064db
--- /dev/null
+++ b/missions/Hypo.py
@@ -0,0 +1,37 @@
+from pybricks.hubs import PrimeHub
+from pybricks.pupdevices import Motor, ColorSensor, UltrasonicSensor, ForceSensor
+from pybricks.parameters import Button, Color, Direction, Port, Side, Stop
+from pybricks.robotics import DriveBase
+from pybricks.tools import wait, StopWatch, run_task, multitask
+
+hub = PrimeHub()
+
+# Initialize both motors. In this example, the motor on the
+# left must turn counterclockwise to make the robot go forward.
+left_motor = Motor(Port.A, Direction.COUNTERCLOCKWISE)
+right_motor = Motor(Port.B)
+
+arm_motor = Motor(Port.D, Direction.CLOCKWISE)
+arm_motor_left= Motor(Port.C, Direction.CLOCKWISE)
+# Initialize the drive base. In this example, the wheel diameter is 56mm.
+# The distance between the two wheel-ground contact points is 112mm.
+drive_base = DriveBase(left_motor, right_motor, wheel_diameter=68.8, axle_track=180)
+
+print('The default settings are: ' + str(drive_base.settings()))
+drive_base.settings(300,1000,300,750)
+# Optionally, uncomment the line below to use the gyro for improved accuracy.
+drive_base.use_gyro(True)
+
+async def main():
+    await drive_base.straight(700)
+    await drive_base.turn(-17)
+    await drive_base.straight(100)
+    await drive_base.straight(-205)
+    await drive_base.turn(62)
+    await drive_base.straight(125)
+    await arm_motor.run_angle(1000, -1200)
+    await drive_base.straight(87)
+    await arm_motor.run_angle(300, 1200)
+    await drive_base.straight(-875)
+
+run_task(main())
\ No newline at end of file