39 lines
1.4 KiB
Plaintext
39 lines
1.4 KiB
Plaintext
import umath
|
|
from pybricks.pupdevices import Motor, ColorSensor, UltrasonicSensor
|
|
from pybricks.parameters import Button, Color, Direction, Port, Side, Stop
|
|
from pybricks.tools import run_task, multitask
|
|
from pybricks.tools import wait, StopWatch
|
|
from pybricks.robotics import DriveBase
|
|
from pybricks.hubs import PrimeHub
|
|
|
|
# Initialize hub and devices
|
|
hub = PrimeHub()
|
|
left_motor = Motor(Port.A, Direction.COUNTERCLOCKWISE)
|
|
right_motor = Motor(Port.B,Direction.CLOCKWISE) # Specify default direction
|
|
left_arm = Motor(Port.C, Direction.CLOCKWISE, [[12,36]],[[12,20,24]] )
|
|
# Specify default direction
|
|
right_arm = Motor(Port.D, Direction.CLOCKWISE,[[12,36],[12,20,24]])
|
|
#Added gear train list for gear ration
|
|
lazer_ranger = UltrasonicSensor(Port.E)
|
|
color_sensor = ColorSensor(Port.F)
|
|
|
|
# DriveBase configuration
|
|
WHEEL_DIAMETER = 68.8 # mm (adjust for your wheels)
|
|
AXLE_TRACK = 180 # mm (distance between wheels)
|
|
drive_base = DriveBase(left_motor, right_motor, WHEEL_DIAMETER, AXLE_TRACK)
|
|
drive_base.settings(700, 500, 300, 200)
|
|
drive_base.use_gyro(True)
|
|
|
|
def set_speed(straight_speed, st_acc, turn_speed, turn_acc):
|
|
drive_base.settings(straight_speed, st_acc, turn_speed, turn_acc)
|
|
|
|
set_speed(400,500,300,200)
|
|
drive_base.straight(950)#Was 950
|
|
drive_base.turn(-35)
|
|
drive_base.straight(70)#Was 40
|
|
drive_base.turn(-30)
|
|
set_speed(800,500,300,200)
|
|
drive_base.turn(30)
|
|
drive_base.straight(-60)
|
|
drive_base.turn(30)#Test Code-detelte if not working
|
|
drive_base.straight(-900) |