##################################### # Solution for BioGlow Mission 8 ##################################### import robot # drive base, arms, sensors and moves all come from robot.py # UNITS used in this file ----------------------------------------------------- # robot.move(cm) distance in cm (+ forward, - backward) # robot.turn(degrees) degrees (+ right / clockwise, - left) # robot.arc(radius_cm, ...) radius in cm (+ circle on the right, - on the left), # then degrees= around the circle or cm= along it (+ forward, - backward) # speed= % of top speed, 1-100 (normal: 80% drive, 72% turn) # acceleration= how fast it speeds up and slows down: # mm/s² for move/arc (normal 500), °/s² for turn (normal 200) # (² means "per second": 200 mm/s² = 200 mm/s faster every second) # arm.move_by(degrees, speed=) arm turn in degrees, speed in % of the arm's top speed # ------------------------------------------------------------------------------ async def solve_missions(): # Research Platform - Johannes # --- ARM HOMING (optional) ------------------------------------------- # Uncomment the next line to push both arms gently against their hard stops # and call that spot 0, so every arm move starts from the same place each run. # Before using it: set home_backward for each arm in robot.py (run arm_calibrate.py). # await robot.home_arms() # --- LET THE GYRO SETTLE ---------------------------------------------- # Wait half a second (and until the hub is perfectly still) before moving, # so turns are measured from a steady heading. await robot.settle_gyro() robot.reset() await robot.arc(128, cm=34) # arc: circle on the robot's RIGHT (128 cm radius), FORWARD 34 cm along it (nose turns right) await robot.arc(-140, cm=35.5) # arc: circle on the robot's LEFT (140 cm radius), FORWARD 35.5 cm along it (nose turns left) await robot.move(14.5, speed=18, acceleration=400) # 14.5 cm forward, 18% speed, 400 mm/s² accel await robot.lift_up(900, speed=93) await robot.lift_down(300, speed=100) await robot.move(-15, speed=18, acceleration=400) # 15 cm backward, 18% speed, 400 mm/s² accel await robot.turn(20, speed=100, acceleration=500) # 20° right, 100% turn speed, 500 °/s² turn accel await robot.move(6.3, speed=100) # 6.3 cm forward, 100% speed await robot.arc(-100, cm=-110, speed=100) # arc: circle on the robot's LEFT (100 cm radius), BACKWARD 110 cm along it (back end swings left, nose turns right) | 100% speed robot.stop() # FIXED: was `await drive_base.stop` (crashed) if __name__ == "__main__": # This run this mission stand-alone when not called from bioglow_main.py robot.run_task(solve_missions())