##################################### # Solution for BioGlow Mission 8 ##################################### import robot # drive base, arms, sensors and moves all come from robot.py # UNITS used in this file ----------------------------------------------------- # robot.move(cm) distance in cm (+ forward, - backward) # robot.turn(degrees) degrees (+ right / clockwise, - left) # robot.arc(radius_cm, ...) radius in cm (+ circle on the right, - on the left), # then degrees= around the circle or cm= along it (+ forward, - backward) # speed= % of top speed, 1-100 (normal: 80% drive, 72% turn) # acceleration= how fast it speeds up and slows down: # mm/s² for move/arc (normal 500), °/s² for turn (normal 200) # (² means "per second": 200 mm/s² = 200 mm/s faster every second) # arm.move_by(degrees, speed=) arm turn in degrees, speed in % of the arm's top speed # ------------------------------------------------------------------------------ async def solve_missions(): # Research Platform - Johannes # --- ARM HOMING (optional) ------------------------------------------- # Uncomment the next line to push both arms gently against their hard stops # and call that spot 0, so every arm move starts from the same place each run. # Before using it: set home_backward for each arm in robot.py (run arm_calibrate.py). # await robot.home_arms() # --- LET THE GYRO SETTLE ---------------------------------------------- # Wait half a second (and until the hub is perfectly still) before moving, # so turns are measured from a steady heading. robot.reset() await robot.arc(128, cm=34.2, speed=100, then=robot.Stop.HOLD) # circle on the RIGHT, forward 34.2 cm await robot.arc(-140, cm=35, speed=100, then=robot.Stop.HOLD) # circle on the LEFT, forward 35 cm await robot.move(10.6, speed=18, acceleration=400) await robot.lift_up(1500, speed=93) # was helper.multilift(1500) await robot.lift_down(250, speed=93) # was helper.multilift(-250) await robot.arc(-100, cm=-110, speed=100, turn_speed=100, turn_acceleration=500) robot.stop() if __name__ == "__main__": # This run this mission stand-alone when not called from bioglow_main.py robot.run_task(solve_missions())