import umath
from pybricks.pupdevices import Motor, ColorSensor, UltrasonicSensor
from pybricks.parameters import Button, Color, Direction, Port, Side, Stop
from pybricks.tools import run_task, multitask
from pybricks.tools import wait, StopWatch
from pybricks.robotics import DriveBase
from pybricks.hubs import PrimeHub

# Initialize hub and devices
hub = PrimeHub()
left_motor = Motor(Port.A, Direction.COUNTERCLOCKWISE)
right_motor = Motor(Port.B,Direction.CLOCKWISE) # Specify default direction
left_arm = Motor(Port.C, Direction.CLOCKWISE, [[12,36]],[[12,20,24]] )
# Specify default direction
right_arm = Motor(Port.D, Direction.CLOCKWISE,[[12,36],[12,20,24]])
#Added gear train list for gear ration
lazer_ranger = UltrasonicSensor(Port.E)
color_sensor = ColorSensor(Port.F)

# DriveBase configuration
WHEEL_DIAMETER = 68.8  # mm (adjust for your wheels)
AXLE_TRACK = 180  # mm (distance between wheels)
drive_base = DriveBase(left_motor, right_motor, WHEEL_DIAMETER, AXLE_TRACK)
drive_base.settings(700, 500, 300, 200)
drive_base.use_gyro(True)

def set_speed(straight_speed, st_acc, turn_speed, turn_acc):
    drive_base.settings(straight_speed, st_acc, turn_speed, turn_acc)

set_speed(400,500,300,200)
drive_base.straight(950)#Was 950
drive_base.turn(-35)
drive_base.straight(70)#Was 40
drive_base.turn(-30)
set_speed(800,500,300,200)
drive_base.turn(30)
drive_base.straight(-60)
drive_base.turn(30)#Test Code-detelte if not working
drive_base.straight(-900)