restructure files for scrimmage
This commit is contained in:
27
shout-fll-scrimmage/bioglow_robot_settings.py
Normal file
27
shout-fll-scrimmage/bioglow_robot_settings.py
Normal file
@@ -0,0 +1,27 @@
|
||||
#Important Notice: All codes should be tested while the robot's battery is at 100%, and all updates must be made when the robot is at full charge.
|
||||
|
||||
from pybricks.pupdevices import Motor, ColorSensor, UltrasonicSensor, ForceSensor
|
||||
from pybricks.parameters import Button, Color, Direction, Port, Side, Stop
|
||||
from pybricks.tools import run_task, multitask
|
||||
from pybricks.tools import wait, StopWatch
|
||||
from pybricks.robotics import DriveBase
|
||||
from pybricks.hubs import PrimeHub
|
||||
import umath
|
||||
|
||||
# Initialize hub and devices
|
||||
hub = PrimeHub()
|
||||
left_motor = Motor(Port.A, Direction.COUNTERCLOCKWISE)
|
||||
right_motor = Motor(Port.B,Direction.CLOCKWISE) # Specify default direction
|
||||
left_arm = Motor(Port.C, Direction.CLOCKWISE, [[12,36],[12,20,24]]) # FIXED: both gear trains in ONE list
|
||||
right_arm = Motor(Port.D, Direction.CLOCKWISE,[[12,36],[12,20,24]]) #Added gear train list for gear ration
|
||||
lazer_ranger = UltrasonicSensor(Port.E)
|
||||
color_sensor = ColorSensor(Port.F)
|
||||
|
||||
# DriveBase configuration
|
||||
WHEEL_DIAMETER = 62.4 # mm (adjust for your wheels)
|
||||
AXLE_TRACK = 150 # mm (distance between wheels)
|
||||
|
||||
# The ONE drive base. Every other file imports it from here — never make another.
|
||||
drive_base = DriveBase(left_motor, right_motor, WHEEL_DIAMETER, AXLE_TRACK)
|
||||
drive_base.settings(600, 500, 300, 200)
|
||||
drive_base.use_gyro(True)
|
||||
Reference in New Issue
Block a user