Add diagnostics-old/OtherFunctions.py

diagnostics-old/ColorSensorDiagnostics.py

@@ -0,0 +1,49 @@
+from pybricks.hubs import PrimeHub
+from pybricks.pupdevices import Motor, ColorSensor, UltrasonicSensor, ForceSensor
+from pybricks.parameters import Button, Color, Direction, Port, Side, Stop
+from pybricks.robotics import DriveBase
+from pybricks.tools import wait, StopWatch
+
+hub = PrimeHub()
+class ColorSensorDiagnostics:
+    def __init__(self):
+        self.colorsensor = None
+        self.port_map = {
+            "A": Port.A,
+            "B": Port.B,
+            "C": Port.C,
+            "D": Port.D,
+            "E": Port.E,
+            "F": Port.F,
+        }
+    def initializeColorSensor(self):
+        valid_ports = {"A", "B", "C", "D", "E", "F"}
+        while True:
+            colorinput = input(
+            "This will test your color sensor.\n"
+            "Enter the port for the color sensor you would like to test (A, B, C, D, E, or F): "
+            ).strip().upper()
+            if colorinput not in valid_ports:
+                print("Invalid port. Please enter A-F.")
+                continue
+            try:
+                if self.colorsensor is None:
+                    self.colorsensor = ColorSensor(self.port_map[colorinput])
+                    print(f"Color Sensor initialized on port {colorinput}.")
+                else:
+                    print(f"Reusing existing color sensor on port {colorinput}.")
+                break
+
+            except OSError as e:
+                if e.errno == 16:  # EBUSY
+                    print(f"Port {colorinput} is already in use. Reusing existing color sensor.")
+                    break
+                else:
+                    print(f"Error initializing color sensor on port {colorinput}: {e}")
+                    print("Make sure a color sensor is actually connected to this port.")
+                    self.colorsensor = None
+        self.colorsensor.detectable_colors(Color.RED, Color.YELLOW, Color.GREEN, Color.BLUE, Color.WHITE, Color.NONE)
+    def printOutput(self):
+        while True:
+            print("HSV output:", self.colorsensor.hsv)
+            print("Detected color:", self.colorsensor.color())

diagnostics-old/DriveBaseDiagnostics.py

@@ -0,0 +1,49 @@
+from pybricks.hubs import PrimeHub
+from pybricks.pupdevices import Motor
+from pybricks.parameters import Button, Color, Direction, Port, Side, Stop
+from pybricks.robotics import DriveBase
+from pybricks.tools import wait, StopWatch
+
+from usys import stdin
+from uselect import poll
+
+hub = PrimeHub()
+port_map = {
+    "A": Port.A,
+    "B": Port.B,
+    "C": Port.C,
+    "D": Port.D,
+    "E": Port.E,
+    "F": Port.F,
+    }
+leftmotorport = input("Enter the left motor port: ")
+left_motor = Motor(port_map[leftmotorport], Direction.COUNTERCLOCKWISE)
+rightmotorport = input("Enter the right motor port: ")
+right_motor = Motor(port_map[rightmotorport],Direction.CLOCKWISE) # Specify default direction
+
+# DriveBase configuration
+WHEEL_DIAMETER = 68.8  # mm (adjust for your wheels)
+AXLE_TRACK = 180  # mm (distance between wheels)
+drive_base = DriveBase(left_motor, right_motor, WHEEL_DIAMETER, AXLE_TRACK)
+drive_base.settings(600, 500, 300, 200)
+drive_base.use_gyro(True)
+# Register the standard input so we can read keyboard presses.
+keyboard = poll()
+keyboard.register(stdin)
+
+while True:
+    # Check if a key has been pressed.
+    if keyboard.poll(0):
+        # Read the key and print it.
+        key = stdin.read(1)
+        print("You pressed:", key)
+        if(key == "W"):
+            print("Insert robot go forward code here")
+        elif(key == "A"):
+            print("Insert robot go left code here")
+        elif(key == "S"):
+            print("Insert robot go backwards code here")
+        elif(key == "D"):
+            print("Insert robot go right code here")
+        else:
+            print("That key doesn't do anything.")

diagnostics-old/HubDiagnostics.py

@@ -0,0 +1,33 @@
+from pybricks.hubs import PrimeHub
+from pybricks.pupdevices import Motor, ColorSensor, UltrasonicSensor, ForceSensor
+from pybricks.parameters import Button, Color, Direction, Port, Side, Stop
+from pybricks.robotics import DriveBase
+from pybricks.tools import wait, StopWatch
+from pybricks import version
+from OtherFunctions import vprint
+import usys
+
+print("Pybricks version information:", version)
+print("MicroPython information:", usys.implementation)
+print("MicroPython version:", usys.version)
+class HubDiagnostics:
+    def __init__(self):
+        self.hub = PrimeHub()
+        self.port_map = {
+            "A": Port.A,
+            "B": Port.B,
+            "C": Port.C,
+            "D": Port.D,
+            "E": Port.E,
+            "F": Port.F,
+        }
+    def testLightSources(self, verbose):
+        v = verbose
+        hub.display.off()
+        for x in range(5):
+            for y in range(5):
+                vprint(f"Turning on pixel at position {x}, {y}...", v)
+                display.pixel(x, y, brightness=100)
+                wait(100)
+                vprint(f"Turning off pixel at position {x}, {y}...", v)
+                display.pixel(x, y, brightness=0)

diagnostics-old/MotorDiagnostics.py

@@ -131,11 +131,11 @@ class MotorDiagnostics:
     print("\n FINAL MOTOR STATISTICS")
     final = (test180 + test540 + test1000) / 3
     print("Final motor health score:", str(final) + "%")
-    if final < 80:
+    if final < 65:
       print("Your motor is in need of attention. Make sure to clean it regularly and charge the Prime Hub.")
-    elif final < 90:
+    elif final < 85:
       print("Your motor is in OK condition. Make sure to clean it regularly and charge the Prime Hub.")
-    elif final < 97:
+    elif final < 95:
       print("Your motor is in great condition!")
     else:
       print("Your motor is in AMAZING condition!!!")

diagnostics-old/OtherFunctions.py

@@ -0,0 +1,2 @@
+def vprint(string, verbose):
+    print("[LOG (verbose enabled)]", string)